Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

Need to replace the cabin air filter on an Insignia? Here's how to do it. Open the glove compartment, then unscrew the securing screws around the frame with a screwdriver. After completing the previous steps, pull the glove compartment out of the dashboard.

Locate the black plastic cover that conceals the air filter (remove it). Pull the air filter out of its housing as shown in the video. Insert the new filter, secure the plastic cover, reassemble the glove compartment, and tighten the securing screws with the screwdriver.

Close the glove compartment after replacement.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…
How to Remove the Diesel Filter on an Opel Insignia
How to Remove the Diesel Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to remove the diesel filter on an Opel Insignia: lift the car on a column lift or suitable jack, locate the diesel filter as shown in the video. …
How to Replace the Cabin Air Filter on the Opel Insignia Series B?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) This guide shows how to replace the cabin air filter on the Opel Insignia Series B. The first step is to remove the outer trim panel of the dashboard…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos