Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the air filter from the Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Air filter

See other generations:
Video tutorial

In this video, you will see how to replace the air filter in the Opel Insignia. Once you have opened the bonnet, first disconnect the mass air flow sensor located on the right side of the filter cover.

Next, start unscrewing the six screws that secure the plastic housing where the air filter is stored. Once all screws are removed, lift the front side of the cover and pull out the filter.

Take the new filter and insert it exactly where the old one was located. Position the cover back in place and secure it again with the screws.

Don't forget to reconnect the mass air flow sensor.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
How to Replace the Engine Air Filter on the Opel Insignia
How to Replace the Engine Air Filter on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Replacing the car's air filter? Let’s remove the filter on the Opel Insignia. Pull up the engine compartment release lever located at the bottom left…
How to Replace the Cabin Air Filter in an Opel Insignia
How to Replace the Cabin Air Filter in an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Among the maintenance tasks you can perform on your Opel Insignia A (2008-2017) is the replacement of the cabin air filter. This is a very important …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos