Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : How to remove the diesel filter on Opel Insigna

Vauxhall Insigna - Video tutorial

Model: Vauxhall Insigna MK 1, Insigna A - Years 2008-2017
Part: Diesel filter
Operation: How to remove the diesel filter on Opel Insigna

How to remove the diesel filter on the Opel Insigna: we lift the car on a column bridge or a special jack, we identify the diesel filter as in the video. With a large screwdriver we unscrew the pin that tightens (we can also use a socket wrench) the container where the diesel filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood after maintenance.


Posted on 30 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Insigna 2008-2017 - Where is the fuel filter on Opel Insignia 2.0 cdti? Read Answer
    • Insigna 2008-2017 - Where is the Opel Insignia diesel filter located? Read Answer
    • Insigna 2008-2017 - Where is the diesel filter of an Opel Insignia located? Read Answer
    • Insigna 2008-2017 - Where is the Opel Insigna diesel filter located? Read Answer
    • Insigna 2008-2017 - Where is the Opel Insigna diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos