Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Filter Located in the Opel Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, you will see where the fuel filter is located in the Opel Insignia and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is positioned at the lower part of the engine and is accessible by lifting the vehicle, taking all necessary safety precautions.

Once accessed, open the water drain valve with a flat-head screwdriver, unscrew the housing with a 36 mm socket, and insert the replacement along with a new gasket. Finally, reassemble everything.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
How to open the stuck fuel tank cap on an Opel Insignia MK1
How to open the stuck fuel tank cap on an Opel Insignia MK1
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this video, we see how to open the stuck fuel cap on an Opel Insignia MK1: unlike many other models, the Opel Insignia does not have release cable…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos