Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

Do you want to replace the diesel filter on your Opel Insignia but don't know how? In this video, learn how to proceed. Lift the car on a column lift and stop it at the desired height for access from underneath.

Unscrew (with a screwdriver) the inspection cap of the filter to check for any liquid leaks. Unscrew the closure cap with a suitable socket wrench, then remove the worn filter and insert the new diesel filter into the designated housing.

Finally, tighten the closure cap with the wrench. Lower the car back to the ground once the work is finished.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter on an Opel Insignia
How to Remove the Diesel Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to remove the diesel filter on an Opel Insignia: lift the car on a column lift or suitable jack, locate the diesel filter as shown in the video. …
Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…
Where is the Fuel Filter Located in the Opel Insignia?
Where is the Fuel Filter Located in the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this video, you will see where the fuel filter is located in the Opel Insignia and how to proceed if you need to replace it, a very simple and qui…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos