Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter of the Opel/Vauxhall Mokka MK2.

Model: Vauxhall Mokka Mokka B - Years 2020-2026
Part: Cabin air filter

Let's see how to replace the pollen filter of the Opel/Vauxhall Mokka MK2: since this is a right-hand drive vehicle, we will find the access panel in the footwell; for left-hand drive vehicles, it will be located in the passenger footwell. We will encounter a long plastic side panel running along the central tunnel, which is secured by pressure clips. Insert a screwdriver between the panel and the structure until you can remove it, and at the top of the central tunnel, we will find a small access panel where we will see two adjacent elements (one upper and one lower) that are the pollen filters. Remove them starting from the lower one, and then clean the container thoroughly of dust and debris. Place the new filters back in their positions and then close the access panel. Reattach the side panel, and the operation is complete.

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the pollen filter of an Opel Mokka
How to replace the pollen filter of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this very short tutorial today, we are shown how to replace the pollen filter on an Opel Mokka, first generation model. Let's start the procedure …
How to replace the cabin air filter of the Opel Mokka
How to replace the cabin air filter of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, we will see the procedure for disassembly and replacement of the cabin air filter or pollen filter of the Opel Mokka. First of all, we…
Replacement of the Opel/Vauxhall Mokka pollen filter
Replacement of the Opel/Vauxhall Mokka pollen filter
Vauxhall Mokka (2012-2019 / Mokka A) In this video, we see the location of the pollen filter on the Opel/Vauxhall Mokka, and how to change it. In the video, we can see the location on a …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos