Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the INSP 2 Service on the Opel Corsa D require and how to reset it?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we can see what the INSP 2 message on the Opel Corsa D requires and how to remove this message from the instrument panel. This alert is an indicator of scheduled maintenance, which automatically activates after a certain number of kilometers or months to remind the user to perform specific maintenance tasks.

INSP indicates a service, and 2 means it is a more comprehensive service compared to type 1, including oil and filter change, filter checks, brake inspection, battery and timing belt checks, and other technical inspections. To reset it, proceed as follows: turn on the ignition, press and hold the reset button located on the tachometer for 5/10 seconds, then turn off and restart the car: the alert should be gone.


Posted on 26 January 2026 by ScegliAuto


Related tutorials

How to reset the maintenance light on the Opel Corsa
How to reset the maintenance light on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In the following article, we will show you how to reset the INSP light, which is the service light of the Opel Corsa C. This procedure does not requi…
How to Reset the "insp" Message on an Opel Corsa
How to Reset the "insp" Message on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To reset the "insp" message on your Opel Corsa, turn on the instrument cluster and note the message on the display, then proceed to reset it; turn of…
How to Reset the "insp 2" Message on the Opel Corsa
How to Reset the "insp 2" Message on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To reset the "insp 2" message on the Opel Corsa, start by turning on the instrument panel and note that the "insp 2" message appears on the dashboard…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos