Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

These simple steps will allow you to remove and replace the radio antenna on the Opel Insignia. First, open the rear boot lid and gently detach the roof lining to access the inside of the antenna; then unscrew the nut fixed at the base and disconnect the electrical connector to pull the antenna out from the outside.

At this point, replace the antenna with the new one, securing it properly; reconnect it and finally check the functionality of the radio!


Posted on 3 April 2026 by ScegliAuto


Related tutorials

Where is the OBD port of the 2011 Opel Insignia?
Where is the OBD port of the 2011 Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) When you encounter issues with the control unit of your 2011 Opel Insignia A, you can attempt to diagnose the problem using a suitable diagnostic too…
Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…
Fuse Location and Diagram on Opel Insignia
Fuse Location and Diagram on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The first fuse box on the Opel Insignia is located in the cabin, specifically low and to the left of the steering wheel, under the side air vent. Her…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos