Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Location and Diagram on Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

The first fuse box on the Opel Insignia is located in the cabin, specifically low and to the left of the steering wheel, under the side air vent. Here you can find, among others, the fuses for the cigarette lighter and air conditioning.

The second, but not the last, fuse box is located under the bonnet, also on the left side of the vehicle (driver's side). Not the last, as there are three fuse compartments on the Opel Insignia: the last one is located on the side wall of the boot, again on the driver's side.

Consult the table to find the fuses or relays you are interested in.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Fuse Diagram and Placement for the Opel Insignia
Fuse Diagram and Placement for the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Today's guide will show you the diagram and placement of the fuse boxes for the Opel Insignia, following the instructions below. First, locate the in…
Fuse Diagram and Location for the Opel Insignia
Fuse Diagram and Location for the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Today's guide will show you where to find the fuse boxes and how to access the fuse diagram for the Opel Insignia in simple steps. First, open the bo…
Where is the fuse box located on the Opel Insignia?
Where is the fuse box located on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The Opel Insignia model A has two fuse boxes. The first fuse box is located under the front bonnet, specifically on the left side near the battery. T…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos