Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Height Setting of the Tailgate on the Opel Grandland-X

Model: Vauxhall Grandland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car door

See other generations:
Video tutorial

Let's see how to adjust the height of the tailgate on the Opel Grandland-X: this is a very useful function to avoid hitting the tailgate with a low garage or to make it easier to reach for shorter individuals. Manually open the tailgate and position it at the exact height you want to set as the new limit.

When it is in the perfect position, press and hold the tailgate closing button for 3 to 5 seconds. You will hear a beep confirming that the system has stored the new height.

Verify that the new maximum height has been saved, and you're done.


Posted on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of an Opel Grandland X
How to Replace the Key Battery of an Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) Start by pressing and holding the button located on the back of the key for your Opel Grandland X. Next, extract the physical emergency key. Once don…
How to disassemble the rear headlight of the Opel Grandland X
How to disassemble the rear headlight of the Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) To quickly and safely remove the rear light of your Opel Grandland X, you must carefully read all the steps described in the following guide and then…
How to Activate and Deactivate the Position Lights on the Opel Grandland X
How to Activate and Deactivate the Position Lights on the Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) If you don't know how to activate and deactivate the position lights on your first-generation Opel Grandland X, don't worry as the steps to follow ar…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos