Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Filter on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years 2008-2017
Part: Engine oil

How to change engine oil and filter on an Opel Insignia? Follow this guide to proceed with the replacement. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet and secure it. Using a socket spanner, loosen the large securing bolt of the container cap where the oil filter is located. Remove the oil filter from inside the container and position a new one. Lift the car on a jack and unscrew the bolt from the oil sump; allow the fluid to drain into a disposal container. Finally, top up with new fluid and close the bonnet.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace engine air filter on Opel Insigna
How to replace engine air filter on Opel Insigna
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Replace the car air filter? Let's disassemble the filter on Opel Insigna, let's see. Pull up the engine compartment opening lever located at the bott…
How to replace the cabin filter of an Opel Insignia.
How to replace the cabin filter of an Opel Insignia.
Vauxhall Insigna (2017-2026 / Insigna B, MK 2) In the video, we are shown how to replace the cabin filter of an Opel Insigna car. First, we need to remove the passenger side storage compartment by…
How to replace the cabin air filter on the Opel Insignia series B
Vauxhall Insigna (2017-2026 / Insigna B, MK 2) The guide shows how to replace the cabin air filter on the Opel Insignia B series. The first step is to remove the external trim panel of the dashboa…

Other guides you may be interested in

    Frequently Asked Questions

    • Insigna 2017-2026 - How many liters of engine oil are required in the Opel Insignia Mk2 diesel? Read answer

How to Remove the Spark Plugs from a Toyota Aygo

How to remove the spark plugs from a Toyota Aygo? In this video, we detail the procedure: Pull the engine bay release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Remove the engine soundproofing panel, then use a socket spanner to unscrew the securing pins of the coils. Grasp the coil and twist it to extract it from the cylinder head. Use a socket spanner and extension to unscrew the spark plugs (remove them from the cylinder head) and take the new spark plug, inserting it into the cylinder head with the socket spanner. Finally, reattach the plastic cover panel.

Watch the video!


by ScegliAuto

More videos