Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil Filter on the Vauxhall Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

See other generations:
Video tutorial

The oil filter replacement should be done when the circuit is completely empty, making it an excellent opportunity to perform a full engine oil change as well. To drain the circuit, you need to access the oil sump and unscrew the bolt that seals it. Once there is no more oil, tighten the bolt again and move on to the filter.

This is located right next to the sump, and you can unscrew it with a suitably sized socket. Remove both the cartridge and the seal and replace them with new parts, lubricate well, and then reposition the filter in its place.

The last thing to do is top up with new engine oil.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil and Filter on an Opel Insignia
How to Change Engine Oil and Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to change engine oil and filter on an Opel Insignia? Follow this guide to proceed with the replacement. Open the car's door and pull up the engin…
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
How to Change the Engine Oil and Filter on an Opel Insignia
How to Change the Engine Oil and Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To change the oil and the oil filter on an Opel Insignia, warm the engine to a moderate temperature, turn it off, and safely lift the car. If present…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos