Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Filter on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

To change the oil and the oil filter on an Opel Insignia, warm the engine to a moderate temperature, turn it off, and safely lift the car. If present, remove the protective panel under the engine and place a container under the sump. Loosen the lower plug and wait for all the used oil to drain out. Next, move to the filter: remove it using an appropriate spanner, or for versions with a cartridge element, open the container and extract the insert.

Fit the replacement and replace any O-ring. Close the drain and introduce the specified amount of lubricant through the fill point, ensuring it meets the engine specifications.

Start the engine briefly, turn it off, and let it rest for a few minutes. Finally, check the level with the dipstick, adjust if necessary, and ensure there are no leaks from the filter area or the plug.


Posted on 1 September 2026 by ScegliAuto


Related tutorials

Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today, we will discover the instructions that will show you how to reset the service light for the routine maintenance of the engine oil change on th…
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to change engine oil and filter on an Opel Insignia? Follow this guide to proceed with the replacement. Open the car's door and pull up the engin…

Other guides you may be interested in

    Frequently Asked Questions

    • Insigna 2017-2026 - How many liters of engine oil does it take in the Opel Insignia 2.0 diesel? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos