Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Filter in an Opel Combo

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part: Engine oil

To change the engine oil and filter in an Opel Combo, park the vehicle on a level surface and wait for the engine to warm up. Safely lift the vehicle and place a container under the oil sump. Open the bonnet and unscrew the oil filler cap, then remove the drain plug located at the bottom of the engine to allow the complete drainage of the used lubricant. Once draining is complete, reinstall the drain plug, ensuring the seal is in good condition. Next, remove the old oil filter and clean the mounting surface thoroughly. Fit the new filter after lightly lubricating the seal with clean oil. Pour the new engine oil through the filler neck, adhering to the specified quantity for the installed engine. Check the level with the dipstick and add oil if necessary. Finally, start the engine for a few seconds, turn it off, and check for leaks before performing a final level check.

Posted on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Combo (1994-2001 / MK 2, Combo B) If it is time to replace the engine air filter in your Opel Combo B, but you don't know how to do it, then you just need to follow the procedure desc…
Vauxhall Combo (2001-2011 / Combo C, MK 3) In this new mini guide, discover how to correctly replace the engine air filter located within your Opel Combo Mk3 (2001-2011). First, turn off the v…
Vauxhall Combo (2012-2018 / Combo D, MK 4) In this tutorial, see how to replace the diesel filter in an Opel Combo van, a very simple and quick operation. Before proceeding, ensure the engine …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos