How to reset the service light on an Opel Vivaro

Model: Vauxhall Vivaro - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:

Video tutorial

To reset the service light on a first-generation Opel Vivaro, you must first complete the scheduled maintenance. One of the procedures involves inserting the key into the ignition and fully pressing the accelerator pedal.

While holding it down, turn the key to position two, turning on the instrument cluster without starting the engine. Next, press the brake pedal three times in quick succession while continuing to hold the accelerator.

After the sequence, turn off the cluster and release the pedals. By turning the instrument cluster back on, you can check if the reset was successful.

On some versions, the maintenance reminder is reset using the button located at the end of the wiper lever, following the instructions on the display.

Posted on 17 October 2026 by ScegliAuto

Other guides you may be interested in

Key - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Instrument Cluster - Maintenance and repair on other vehicles

How to Open the Hood of the Mercedes GLC?

To open the hood of the Mercedes GLC, go inside the cabin on the driver's side to locate the red lever at the bottom of the dashboard on the left. Once you find this lever, pull it back to unlock the hood latch mechanism. After the mechanism is unlocked, exit the cabin and move the latch corresponding to the mechanism to fully release the hood. At this point, you can lift it and access the engine compartment.

Watch the video!

by ScegliAuto

How to reset the service light on an Opel Vivaro

Related tutorials

Other guides you may be interested in

How to Open the Hood of the Mercedes GLC?

More videos