Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Air Conditioning Resistor

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Air conditioning

If the air conditioning temperature regulator is not functioning properly, it is necessary to replace it. After obtaining the original spare part, locate the faulty component on the side of the blower inside the pollen filter compartment. Remove the pollen filter to access the component, and reach in to find the resistor, grasp it, and pull it out. Once removed from its housing, proceed with the replacement by disconnecting the wires attached to it via the connectors, and carefully reconnect them to the new component. Reassemble everything carefully.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to turn on the air conditioning of the Opel Astra
How to turn on the air conditioning of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following video tutorial shows us the steps to follow to turn on the air conditioning of the Opel Astra model H, when we deem it necessary. To tu…
How to replace the fan resistor on an Opel Astra
How to replace the fan resistor on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) How to replace the fan resistor on an Opel Astra. This guide shows you how to carry out the disassembly. Remove the plastic panel in the dashboard us…
How to Replace the Fan Resistor on an Opel Astra
How to Replace the Fan Resistor on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Before you begin, it is highly recommended to disconnect the battery to work safely on the electrical system. Start by removing the glove compartment…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos