Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Engine oil

Before you begin, open the bonnet of your Opel Meriva to access the engine compartment. Start by unscrewing and removing the upper oil filler cap. Next, you will need to lift the front end of your vehicle to access the lower drain nut. Proceed by unscrewing and removing the lower nut to drain all the engine oil. Once the engine oil has completely drained, re-screw the lower nut and lower the front end. At this point, insert the new oil through the upper filler hole, then re-screw the corresponding cap, and the replacement is complete.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Opel Meriva
How to replace the engine oil and oil filter of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Today we will show you how to replace the engine oil and oil filter on an Opel Meriva car. To perform the engine oil replacement, we need to lift the…
Replacement of the gearbox oil for the Opel Meriva 1.4
Replacement of the gearbox oil for the Opel Meriva 1.4
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Today we will see the main instructions that will allow us to disassemble and replace the gearbox oil of the Opel Meriva 1.4. First of all, we lift t…
How to Reset the Oil Service on the Opel Meriva?
How to Reset the Oil Service on the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this tutorial, we will see how to reset the oil service on the Opel Meriva, a very simple and quick operation to perform only after completing the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos