Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

Today we will show you how to replace the engine oil and oil filter on an Opel Meriva car. To perform the engine oil replacement, we need to lift the car and remove the lower cover. We remove the oil cap and let the oil drain into a container.

Once the oil has stopped draining, we close the cap and lower the vehicle back to the ground. The oil filter is located inside the front hood.

We unscrew the nut on the filter and remove the box. After replacing the filter, we finish by topping up the oil in the tank, the amount to be added is 1.5 liters.


Posted on 1 January 2025 by ScegliAuto


Related tutorials

How to Change the Oil, Oil Filter, and Air Filter in the Opel Meriva
How to Change the Oil, Oil Filter, and Air Filter in the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) After positioning your Opel Meriva on a ramp or flat surface for stability and safety, open the front bonnet of the engine compartment. Once you loca…
How to Replace the Air Conditioning Filter on an Opel Meriva
How to Replace the Air Conditioning Filter on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Replace the cabin air filter on an Opel Meriva? Let’s look at removing the exhausted filter from the Opel. Open and lift the front bonnet, unscrew th…
How to Change the Engine Oil on an Opel Meriva
How to Change the Engine Oil on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before you begin, open the bonnet of your Opel Meriva to access the engine compartment. Start by unscrewing and removing the upper oil filler cap. Ne…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos