Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the INSP Light on Opel Agila

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Warning light – error code

Turn the instrument cluster on and off (not the engine, it's not necessary) by turning the ignition key. Now, look under the speedometer and you will see two buttons: press and hold the one on your left. While doing this, turn the key again to turn on the instrument cluster: after holding the speedometer button for a few seconds, with the cluster on, the light will start to flash and then turn off. To check that the reset has been successful, turn off the ignition again and start the engine. This procedure should only be used after performing a service.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Agila?
How to Reset the Service Light on the Opel Agila?
Vauxhall Agila (2000-2007 / Agila A) To reset the Service light on the Opel Agila, press and hold the button located at the centre of the instrument cluster while it is off. While holdin…
Where to Find the OBD Port on an Opel Agila B
Where to Find the OBD Port on an Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) If you are looking for the OBD port on your Opel Agila B but haven't found it yet, just follow these steps. First, get inside the vehicle and reach t…
How to Reset the Service Light on Opel Agila B
How to Reset the Service Light on Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) In this video, we will see how to reset the service light on an Opel Agila B 2008/2012: as with almost all vehicles (with a few exceptions), ensure t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos