Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan and Its Resistor on the Opel Astra G

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will find the main instructions for removing the cabin fan and its resistor on the second series Opel Astra G. First, get inside the vehicle and start by removing the glove compartment; unscrew all the fixing screws to do this.

Once removed, you can take off the plastic panel at the bottom and disconnect all the electrical cables from the fan and the resistor; unscrew the screws to remove the cabin fan. Finally, separate the fan from the resistor by unscrewing the three fixing screws!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on the Opel Astra?
How to Replace the Cabin Fan on the Opel Astra?
Vauxhall Astra (2004-2010 / Astra H) To replace the cabin fan on the Opel Astra, open the glove compartment located on the passenger side: once open, loosen the fastening bolts inside to…
How to replace the fan resistor on an Opel Astra
How to replace the fan resistor on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) How to replace the fan resistor on an Opel Astra. This guide shows you how to carry out the disassembly. Remove the plastic panel in the dashboard us…
How to Replace the Fan Resistor on an Opel Astra
How to Replace the Fan Resistor on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Before you begin, it is highly recommended to disconnect the battery to work safely on the electrical system. Start by removing the glove compartment…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos