Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fan resistor on an Opel Astra

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

How to replace the fan resistor on an Opel Astra. This guide shows you how to carry out the disassembly.

Remove the plastic panel in the dashboard using a lever (remove the securing screws of the glove compartment), then unscrew the cover where the resistor is located with a screwdriver. Disconnect the large connector of the resistor, then remove it from the cabin.

Insert a new fan resistor (connect the power connector). Finally, reassemble the glove compartment and tighten the screws.

Check the correct assembly of the previously installed parts and test their proper functioning.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan and Its Resistor on the Opel Astra G
How to Remove the Cabin Fan and Its Resistor on the Opel Astra G
Vauxhall Astra (1998-2006 / Astra G) In this video tutorial, you will find the main instructions for removing the cabin fan and its resistor on the second series Opel Astra G. First, get…
How to Replace the Fan Resistor on an Opel Astra
How to Replace the Fan Resistor on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Before you begin, it is highly recommended to disconnect the battery to work safely on the electrical system. Start by removing the glove compartment…
Replacing the Cabin Fan on the Opel Astra H
Replacing the Cabin Fan on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) This video tutorial shows how to remove and replace the cabin fan on the Opel Astra H, following these simple steps. First, get into the vehicle and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos