Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on an Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Headlight

This guide shows how to replace the headlight bulbs on an Opel Corsa E; the bulb replacement is the same for both sides. Open the bonnet and go to the side where you need to work, then simply unscrew the cap counter-clockwise located near the bulb to be replaced. At this point, the bulb holder is exposed, which can be detached by pressing the plastic tab located under the housing; by pulling out the bulb, you can perform the replacement. The daytime running light bulb is held in place by a two-clip holder. To remove it, press the two clips and pull.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs of an Opel Corsa
How to Replace the Front Headlight Bulbs of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Learn how to replace the front headlight bulbs of an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashbo…
How to Replace the Rear Light Bulbs on an Opel Corsa
How to Replace the Rear Light Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear light of your Opel Corsa not working anymore? Let’s see how to replace the rear light bulbs. Open the boot; remove the insp…
How to Change the Front Headlight Bulbs on an Opel Corsa
How to Change the Front Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Learn how to change the front headlight bulbs on an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashboa…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos