Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : How to replace the turn signal light bulb on the Opel Zafira?

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 2, Zafira B, A05 - Years 2005-2011
Part: Light bulb
Operation: How to replace the turn signal light bulb on the Opel Zafira?

In order to replace the Opel Zafira turn signal light bulb, you have to remove the ceiling light that includes the light bulb from inside its housing. To do this, simply pull it out with your hands. Once removed, the bulb can be removed from inside the light fixture and detached from its connector. At this point it will be possible to connect the new bulb to its connector and insert it inside the ceiling light. The latter will then have to be inserted again in its housing; at the end of the operation, it will be possible to verify its correct functioning.


Posted on 2 March 2024 by ScegliAuto



How to replace the headlight bulb on an Opel Zafira
Vauxhall Zafira (2011-2019 / MK 3, Zafira C) Before we begin, we will have to open the front hood of our Opel Zafira. So let's start by unscrewing and removing the rear cover of the burnt out he
How to replace the headlight bulb of the Opel Zafira A
Vauxhall Zafira (1999-2005 / T98, Zafira A, MK 1) In this new guide dedicated to your Opel Zafira A (year 1999-2005), we will discover together the steps to follow to correctly replace the front head
Replacement of the front headlight bulb on the Opel Zafira.
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) In this video tutorial, we will see how to disassemble and replace the headlight bulb of the Opel Zafira, following the instructions below. First, we

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos