Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Indicator Bulb.

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Side marker bulb

Open the engine bay bonnet. Locate the position of the indicator bulb in the front headlamp. Disconnect the electrical power cables. Remove the rubber protective cover and extract the indicator bulb from its housing. Take the new bulb, being careful not to touch the glass bulb with your fingers as this could cause it to burn out. Insert the new bulb into its housing, reposition the rubber cover, and reconnect the electrical power. The vehicle shown in the images is an Opel Zafira.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Opel Zafira
How to Replace the Front Headlight Bulb on the Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The following video tutorial illustrates the steps to easily and quickly replace the front headlight bulb on the Opel Zafira model C independently. O…
How to Replace the Indicator Bulb on an Opel Zafira?
How to Replace the Indicator Bulb on an Opel Zafira?
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) To replace the indicator bulb on the Opel Zafira, remove the light fitting covering the bulb from its housing. Simply pull it out by hand. Once remov…
How to replace the front headlamp bulb on an Opel Zafira
How to replace the front headlamp bulb on an Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Before starting, open the front bonnet of your Opel Zafira. Begin by unscrewing and removing the rear cover of the blown bulb of the front headlamp. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos