Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of an Opel Meriva B?

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Door trim panel

Start by removing the plastic cover near the door handle using a thin but sturdy tool. Repeat this step for the plastic cover of the handle itself and for the cover behind the opening handle. Once these covers are removed, you will expose some screws. Proceed to unscrew and remove these screws using a Torx T20. After this step, before you can remove the panel, you need to take off the window winder. To do this, pull it away from the panel by two millimetres, then remove the clip that secures it, allowing you to take off the winder. Once done, use the thin but sturdy tool to pry along the entire perimeter of the panel to release the clips that hold it in place. When all the clips are released, you can remove the panel, successfully completing the disassembly.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Opel Meriva
How to disassemble the front door panel of the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) These short and simple steps will show us how to disassemble and remove the front door panel of the Opel Meriva. First of all, we open the front door…
How to Replace the External Mirror on an Opel Meriva?
How to Replace the External Mirror on an Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the external mirror on an Opel Meriva, first remove the corresponding door panel. Once detached, disconnect the mirror connector from its …
How to Remove the Door Panel from an Opel Meriva?
How to Remove the Door Panel from an Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To remove the door panel from an Opel Meriva, detach the cover of the armrest, which has the window switch, by releasing its retaining clips. After r…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos