Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the spanner warning light mean and how to reset it on an Opel Meriva?

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Key

When the spanner warning light appears on the instrument cluster of your Opel Meriva, it indicates that it is time for a scheduled service. Once the service has been completed, you need to reset the warning light. Start by pressing and holding the right button on the instrument cluster while turning on the ignition. Continue to hold the button until the warning light turns off. When the spanner warning light goes out, switch off the ignition, and you will have completed the reset.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What does the message "Code 60" indicate in the Opel Meriva?
What does the message "Code 60" indicate in the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) If the message "Code 60" appears on the dashboard of our Opel Meriva, it means that the side window on the passenger side is not calibrated correctly…
What Does "Code 82" Mean and How to Reset It on an Opel Meriva B?
What Does "Code 82" Mean and How to Reset It on an Opel Meriva B?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) When "Code 82" appears on the instrument cluster of your Opel Meriva B, it indicates that it's time to change the engine oil and perform the service.…
How to Replace the Front Headlamp Bulb on an Opel Meriva
How to Replace the Front Headlamp Bulb on an Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) When an Opel Meriva displays the code "error 20", it means the right main beam bulb needs replacing. To carry out the replacement, purchase an H7 bul…

    Frequently Asked Questions

    • Meriva 2003-2010 - What does the yellow car light indicate with the Opel Meriva wrench? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos