Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Service warning light

In this video tutorial, learn how to reset the engine oil maintenance light on an Opel Corsa, produced from 2014 to 2019. First, turn on the ignition without starting the vehicle. Press the menu button located on the left stalk of the steering wheel, then scroll through the menu options using the arrows on the same stalk until you reach "oil life remaining". Enter this option by pressing the end button on the stalk. You will then be asked if you are sure you want to reset the light, so confirm to reset the maintenance light.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the New Opel Corsa F
How to Reset the Service Light on the New Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) If you own the new Opel Corsa F and want to learn how to correctly reset the service light on the instrument panel, simply follow these easy steps. F…
How to reset the service light on the Opel Corsa
How to reset the service light on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To reset the service light of the Opel Corsa model C, you need to use our video guide with description, in order to avoid making mistakes. We start b…
How to Reset the Service Light on an Opel Corsa F
How to Reset the Service Light on an Opel Corsa F
Vauxhall Corsa (2019-2026 / Corsa F) .. In today’s article, we will see how to reset the service light on an Opel Corsa F. It is recommended to perform this procedure only after h.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos