Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and How to Replace the Spark Plugs on the Opel Adam 1.2?

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Spark plugs

This guide provides instructions for removing and replacing the spark plugs on the Opel Adam 1.2; they should typically be replaced within an interval of 18,000 to 37,000 miles. First, open the bonnet of your car and start disconnecting the electrical connectors found on the upper part of the cylinder head, disconnecting the coil connectors; now use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. At this point, replace the spark plugs with new ones of the correct type, hand-tightening before securing with a wrench!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Spark Plugs in an Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) According to the manufacturer, the spark plugs, and consequently the entire service of the car, should be replaced every 15,000 miles, or every year,…
How and when to replace the timing chain of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) Today we will see the main information useful for disassembling and replacing the timing chain of the Opel Adam; generally, the timing chain should b…
Where is the OBD port of the Opel Adam located?
Where is the OBD port of the Opel Adam located?
Vauxhall Adam (2013-2019 / MK 1) In the following guide, we will explain step by step how you can locate the OBD port inside your Opel Adam in a few seconds. First of all, go inside …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos