Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Movano

Model: Vauxhall Movano Movano A, MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

Whenever you perform an oil change and replace the filter as part of the service, you should reset the warning light that appears on the dashboard. To do this, follow the instructions below, and you can also refer to the video: first, sit in the driver's seat and turn on the ignition, then press the buttons marked with the up and down arrows located at the ends of the right multifunction lever until the service indication appears on the onboard computer display.

Then, press and hold the button with the up arrow for about 10 seconds until the service warning is cleared. After that, release the button and turn off the ignition.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on an Opel Movano?
How to reset the "Service" light on an Opel Movano?
Vauxhall Movano (2010-2021 / MK 2, Movano B) Good morning, today you will reset the "Service" light on your Opel Movano. Before proceeding, ensure you have completed the service. Start by turnin…
How to Reset the Service Light in an Opel Movano Van?
How to Reset the Service Light in an Opel Movano Van?
Vauxhall Movano (2010-2021 / MK 2, Movano B) Resetting the service light in an Opel Movano van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure t…
How to Reset the Service Light on a 1999 Opel Movano?
How to Reset the Service Light on a 1999 Opel Movano?
Vauxhall Movano (1998-2011 / Movano A, MK 1) Resetting the service light on a 1999 Opel Movano is a very simple operation, easily done independently with the help of our short video tutorial. To…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos