Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Injectors on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuel injectors

See other generations:
Video tutorial

Before starting the procedure, disconnect the battery and reduce the LPG pressure by loosening the clamp. Disconnect the pipe and then unplug the connectors, making sure to remember their exact order.

Use a 10mm socket to remove the four screws holding the plate, then pull it away to free the injectors, which can now be removed using a pair of pliers. Before fitting the new injectors, clean their seats, then insert them by applying some pressure and reattach the plate, reconnect the connectors, the pipe, and tighten the clamp again.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Clean LPG Injectors on Opel Corsa C
How to Clean LPG Injectors on Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Equipping your car with an LPG fuel system certainly has numerous advantages in terms of fuel consumption, but you must also consider the potential m…
How to Remove the Injectors from an Opel Corsa
How to Remove the Injectors from an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. Begin by unclipping and removing the engine cover. Next, disconnect the electrical connecto…
How to Remove the Injectors from the Opel Corsa 1.3 CDTi
How to Remove the Injectors from the Opel Corsa 1.3 CDTi
Vauxhall Corsa (2006-2014 / Corsa D) These simple steps will show you how to remove and replace the injectors of the Opel Corsa 1.3 CDTi, following the instructions below. First, open th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos