Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Key

See other generations:
Video tutorial

In this short tutorial, you will replace the ignition key battery for an Opel Corsa. First, separate the blade from the key fob. Use the tip of a flathead screwdriver to pry at the indicated point in the video and separate the two parts.

The piece without the blade contains the battery. To open it, use the same screwdriver to separate the two pieces of the battery holder.

With the screwdriver, lift and remove the old battery and replace it with a new one, then reassemble everything as it was.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of an Opel Corsa
How to Replace the Key Fob Battery of an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) This tutorial shows you how to replace the battery in the key fob of an Opel Corsa. The operation is very simple and does not take much time; take yo…
How to replace the battery of the Opel Corsa model E key
How to replace the battery of the Opel Corsa model E key
Vauxhall Corsa (2014-2019 / Corsa E) Replacing the remote control battery of the Opel Corsa model E produced from 2014 to 2019 is a simple and quick operation to be carried out independe…
How to replace the battery of the Opel Corsa
How to replace the battery of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today we will explain how to replace the battery of the Opel Corsa model d. To perform the replacement, we need to open the front hood and using a 10…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos