Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Gear Shift Control

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Transmission

This video illustrates how to remove and replace the gear shift control linked to the gear lever of your car. If changing gears is difficult and quite stiff, the problem likely lies in the gear shift control, which may need replacing or simply adjusting correctly. To try to resolve the issue, check and modify the settings of the gear shift control located at the top of the engine bay. Finally, if the problem persists, to eliminate it completely, you will need to replace the entire gear shift control piece.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on the Opel Corsa
How to Replace the Gear Knob on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this short and simple guide, learn how to remove and replace the gear knob and gaiter on the Opel Corsa, following these quick steps. First, get i…
How to replace the gear knob of the Opel Corsa
How to replace the gear knob of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) These short and simple steps will illustrate the process of disassembling and replacing the knob and the sleeve of the gear lever of the Opel Corsa. …
How to Replace the Gear Knob Cover on the Opel Corsa?
How to Replace the Gear Knob Cover on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the cover on top of the gear knob on the Opel Corsa, use a lever-like object, such as a flat screwdriver: insert it into the groove formed…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos