Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Stem Seal Replacement

Model: Vauxhall Kadet Kadet E - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Part: Engine

Video tutorial

Replacing the valve stem seals is a task that can be performed with the right knowledge, carefully following the instructions. It is important to have disposable rags on hand to remove dirt and grease residues.

This operation always requires a bit of manual dexterity. During this process, it can be very helpful to apply a bit of oil to the stem and the new seal.

Carry out the operation with great care and precision to avoid irreparably damaging the part. The new seal should be well oiled and positioned on the stem with a certain amount of pressure.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Valve Stem Seal
Replacing the Valve Stem Seal
Vauxhall Kadet (1984-1993 / Kadet E) Replacing the valve stem seal is a challenging task that requires some mechanical knowledge. It is important to know that each seal, whether right or…
Replacing Camshaft Oil Seal
Replacing Camshaft Oil Seal
Vauxhall Kadet (1984-1993 / Kadet E) The camshaft oil seal is also included in the gasket kit; before inserting it, it must be generously lubricated using clean engine oil. At this point…
Removal of Engine Valve Cover Gasket
Removal of Engine Valve Cover Gasket
Vauxhall Kadet (1984-1993 / Kadet E) The valve cover is located on top of the engine and is connected by a rubber or cork gasket, which prevents oil leaks. This guide shows how to remove…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos