Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Washer Nozzle Replacement

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

To replace the windscreen washer nozzles, first remove the wiper blades: take off the protective caps from the nuts securing the wiper arms; then unscrew the nuts and remove the arms; next, remove the seal and plastic cover under the windscreen and disconnect the nozzles (avoid using a hammer near the windscreen).

At this point, disconnect the old nozzles from the rubber tube and install the new ones, repositioning them in their seats and reassembling everything previously removed.

To avoid damaging the nozzles, it is recommended to fill the reservoir with distilled water and a specific cleaner.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacement of Windscreen Washer Nozzles
Replacement of Windscreen Washer Nozzles
Vauxhall Astra (2004-2010 / Astra H) Due to hard water, the windscreen washer nozzles can become clogged. Replacing them is quite simple: open the front bonnet and remove the seal along …
Repairing the Windscreen Washer System on Opel Astra
Repairing the Windscreen Washer System on Opel Astra
Vauxhall Astra (2009-2016 / Astra J) Use antifreeze to avoid winter problems with the windscreen washer system. Blow out the washer nozzles with an air compressor. If the fluid still doe…
How to Replace the Windscreen Washer Nozzles on the Opel Astra H
How to Replace the Windscreen Washer Nozzles on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this tutorial, you will learn how to remove and replace the windscreeen washer nozzles on the Opel Astra H by following these simple steps. First,…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos