Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on an Opel Astra?

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In this video, you can see how to remove the front headlamp on an Opel Astra J. For this operation, you will need a flathead screwdriver, a 7mm socket, a 10mm socket, extensions, and a Torx T20 key. Start by unscrewing the fixing screws of the bumper located inside the wheel arch, then unscrew the other upper and lower fixing screws.

At this point, unclip the bumper and move it enough to access the fixing bolts of the headlamp, which are 7mm and 10mm. Finally, disconnect the rear connector and pull the headlamp out of the bodywork.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to remove the front lamp of the Opel Astra F
How to remove the front lamp of the Opel Astra F
Vauxhall Astra (1991-1998 / Astra F) To successfully remove the front lamp of your Opel Astra F, follow the steps described in the following guide. First, ensure that the vehicle is park…
How to Remove the Fog Light from the Opel Astra H?
How to Remove the Fog Light from the Opel Astra H?
Vauxhall Astra (2004-2010 / Astra H) To remove the front fog light from the Opel Astra H, you need to remove the front bumper by unscrewing the appropriate screws and rivets and disconne…
How to Remove the Front Headlight of an Opel Zafira
How to Remove the Front Headlight of an Opel Zafira
Vauxhall Astra (2004-2010 / Astra H) Let's see how to remove the front headlight of an Opel Astra. Open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastenin…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos