Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Rear Lights of the Opel Astra J

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Removing the rear lights requires just a few simple steps and can be done in a matter of minutes. Fortunately, they are secured to the chassis with simple plastic clips and can be accessed directly from the area of the rear boot.

Unscrew them until they are completely loose. Repeat the same operation on both sides.

Disconnect the two connectors from the lights and free them completely. At this point, you can proceed with their replacement.

Take the new lights and connect them to the appropriate connectors. Position the two lights in their original location and screw in the appropriate clips.

The removal and installation operations are complete; just test them on the road.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Replacement of the rear headlight bulb of the Opel Astra.
Replacement of the rear headlight bulb of the Opel Astra.
Vauxhall Astra (2015-2022 / Astra K) Below we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Astra. First, open the r…
Replacement of the rear headlight bulbs of the Opel Astra
Replacement of the rear headlight bulbs of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will allow us to disassemble and replace the bulbs of the rear light of the Opel Astra. First, we open the rear tailgate o…
Removing Rear Bumper on Opel Astra H
Removing Rear Bumper on Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this video tutorial, you will learn how to remove the rear bumper on an Opel Astra H in simple steps. First, open the boot and then open the side …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos