Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Replacement of rear brake pads

Vauxhall Vectra - Video tutorial

Model: Vauxhall Vectra MK 2, Vectra B - Years 1995-2002
Part: Brake pads
Operation: Replacement of rear brake pads

Once the car has been positioned on suitable car stands, remove the rear wheel and proceed with the disassembly of the brake caliper fixing pins (remove only the lower pin so that the caliper can be rotated by pivoting on the upper one); release the pad retaining spring by levering with a screwdriver; lift the brake caliper and remove the old pads; use the special tool to rotate and retract the caliper piston; lubricate the pad seats and the fixing pins in order to be able to insert the new pad set, the fixing spring and tighten the fixing pins.


Posted on 5 August 2023 by ScegliAuto



How to replace the brake pads of your car
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) The brake pads play a fundamental role in the safety of the vehicle and that is why it is extremely important to always keep them in perfect working
Replacement of front brake pads
Vauxhall Vectra (1995-2002 / MK 2, Vectra B) Raise the vehicle on a bridge or on suitable car stands; then disassemble the front wheel, remove the protection caps of the brake caliper fixing pin
Replacement of front brake pads
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) Remove the plastic wheel bolt covers and unscrew the nuts. Raise the car and remove the brake caliper by removing the two spring clips with a caliper

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos