Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on an Opel Agila Second Series

Model: Vauxhall Agila Agila B - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

The video shows how to reset the service light on an Opel Agila Second Series. It is a very simple operation that can be done independently and takes only a few seconds.

Press the button at the bottom left and then turn the key without starting the engine. The service light will begin to flash.

Wait until three dots appear on the display below. Release the button at this point.

Then turn off the ignition and turn it back on, again without starting the vehicle. If the service light remains off, the reset has been successful.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Agila?
How to Reset the Service Light on the Opel Agila?
Vauxhall Agila (2008-2015 / Agila B) To reset the Service light on the Opel Agila, press and hold the button located at the bottom left of the instrument panel, next to the clock symbol.…
How to Reset the Service Light on an Opel Agila?
How to Reset the Service Light on an Opel Agila?
Vauxhall Agila (2008-2015 / Agila B) To reset the Service light on an Opel Agila, press and hold the button located on the left side of the instrument cluster while keeping the cluster o…
How to Replace the Battery in an Opel Agila
How to Replace the Battery in an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) In this short video tutorial, learn how to replace the battery in a second-generation Opel Agila, produced from 2008 to 2015. First, open the bonnet.…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos