Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing LED Bulbs

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Accessory kit

See other generations:
Video tutorial

To install the rear number plate LED lights, release the bulb holder by pressing the side clip and pulling down; then remove the original bulb and insert the LED one. Next, move to the front headlamp by removing the rubber covers, unhooking the retaining springs, and replacing the original bulbs with LED ones: LED bulbs will give the vehicle a more modern appearance and provide significantly improved illumination depth as well as increased brightness; a recommendation, avoid outrageous colours!


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Replace Interior Lights with LED on Opel Astra K
How to Replace Interior Lights with LED on Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) In this video tutorial, you can see how to replace the interior lights of the cabin with LED on an Opel Astra K. The first step is to prepare a kit o…
Replacement of Glove Compartment Bulb
Replacement of Glove Compartment Bulb
Vauxhall Astra (2004-2010 / Astra H) Open the glove compartment to access the bulb holder located on the left side. Remove the faulty bulb by pulling it out and refit the new bulb. Choos…
Instructions for Armrest Installation
Instructions for Armrest Installation
Vauxhall Astra (1991-1998 / Astra F) Installing the armrest is a very simple task as it does not require disassembly or modification of any components; it comes with a shaped mounting pl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos