Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine

See other generations:
Video tutorial

Before applying the new gasket to the rocker cover, it is essential to thoroughly clean the gasket seating on both the cover and cylinder head sides to remove any dirt or deposits that could compromise the gasket's adhesion and sealing. Once cleaning is complete, insert the new gasket into the groove along the edges of the cover, ensuring it adheres perfectly; then apply gasket sealant only at the junction points of the block, where the timing chain pulleys are located, and refit the cover by tightening the respective fixing pins.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rocker Cover Gasket on the Opel Corsa C?
How to Replace the Rocker Cover Gasket on the Opel Corsa C?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rocker cover gasket on the Opel Corsa C, open the bonnet to access the components inside the engine bay. Specifically, unscrew the scr…
How to Replace the Rocker Cover Gasket on an Opel Corsa C
How to Replace the Rocker Cover Gasket on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's tutorial, you will see how to remove and replace the rocker cover gasket on an Opel Corsa C. First, open the bonnet and start by removing …
Instructions for Removing Hydraulic Lifters on Opel Corsa D
Instructions for Removing Hydraulic Lifters on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial video, you will see the main instructions to remove the hydraulic lifters from an Opel Corsa D. To access the engine head, you will …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos