Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Hydraulic Lifters on Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014

In this tutorial video, you will see the main instructions to remove the hydraulic lifters from an Opel Corsa D. To access the engine head, you will need to remove the engine cover and all the wiring found on top, also removing the spark plugs along with their leads; then disconnect the timing chain, as you will need to remove the camshafts. Once the cylinder head cover is removed, unscrew the fixing bolts of the camshaft and take them out to access the lifters: simply extract them using pliers!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Water Pump on the Opel Corsa 1.2
Guide to Replacing the Water Pump on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's guide will show you the main steps to remove and replace the water pump on the Opel Corsa 1.2. First, open the bonnet and begin by removing t…
Guide to Replacing the Timing Chain on the Opel Corsa 1.2
Guide to Replacing the Timing Chain on the Opel Corsa 1.2
Vauxhall Corsa (2000-2006 / Corsa C) In today's video, you will learn how to remove and replace the timing chain on the Opel Corsa 1.2 petrol. First, open the bonnet and start by removin…
Guide to Remove the Rear Seats on the Opel Corsa D
Guide to Remove the Rear Seats on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this brief guide, discover the steps to remove the rear seats, both the bench and the backrest, on the Opel Corsa D, following the instructions be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos