Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change service and low AdBlue level on Vauxhall Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: AdBlue warning light

Open the door, sit in the driver's seat, and close all the doors. Locate the control on the dashboard with the key symbol, which is found below the digital display between the speedometer and the rev counter (the control you are looking for is the last one on the left). Press and hold the indicated control while simultaneously turning the ignition key and switching on the ignition. At this point, a ten-second countdown will begin on the digital display, after which you can release the control. Then, briefly press the key control again. The service maintenance and AdBlue level will be reset.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to check the AdBlue level of the 2020 Opel Vivaro.
How to check the AdBlue level of the 2020 Opel Vivaro.
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today we will see how to check the AdBlue level in the tank of the 2020 Opel Vivaro. To check the fluid level, we need to turn on the instrument pane…
Resetting the AdBlue warning light on the Opel Vivaro
Resetting the AdBlue warning light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this guide, we will see the main steps that will allow us to reset the warning light for topping up the AdBlue liquid in the Opel Vivaro. Before r…
How to top up AdBlue and reset the warning light on the Opel Vivaro
How to top up AdBlue and reset the warning light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today we will discover the instructions that will allow us to top up the AdBlue liquid, consequently resetting the message on the display of the Opel…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos