Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Karl
    4. : How to reset the Opel Karl service

Vauxhall Karl - Video tutorial

Model: Vauxhall Karl MK 1 - Years 2015-2019
Part: -board computer
Operation: How to reset the Opel Karl service

We reset the Opel Karl service: turn on the instrument panel, the word "oil change" appears, turn the ignition off, turn it on again, press the "menu" button on the stalk that controls the direction indicators until the symbol appears oil with the percentage symbol, hold down the button at the left end of the lever that controls the direction indicators until the number 100 appears next to the percentage symbol, finally we can switch off the ignition. Turn the ignition back on and if the wording "oil change" no longer appears the service has been reset, otherwise repeat the operation.


Posted on 21 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Karl 2015-2019 - What does code 16 on Opel Karl signal? Read Answer
    • Karl 2015-2019 - What does code 18 signal on Opel Karl? Read Answer
    • Karl 2015-2019 - What does fault code 21 on Opel Karl signal? Read Answer
    • Karl 2015-2019 - What does fault code 20 on Opel Karl signal? Read Answer
    • Karl 2015-2019 - What does code 22 correspond to in the Opel Karl? Read Answer
    • Karl 2015-2019 - What does code 59 mean in an Opel Karl? Read Answer
    • Karl 2015-2019 - What does code 89 mean in an Opel Karl? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos