Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in the Opel Vivaro Van?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Clock

In this tutorial, you can see how to adjust the time in the Opel Vivaro van, an extremely simple and quick operation to perform, for example, after replacing the battery or after the switch to daylight saving time. First, insert the key and turn on the instrument cluster, then repeatedly press the button at the end of the right stalk until you reach the "SET CLOCK" screen. At this point, wait for the time to start flashing, then hold down the same button and change the hour value. Similarly, you can adjust the minutes and finally save the setting.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Deactivate the Passenger Airbag in an Opel Vivaro Van?
How to Deactivate the Passenger Airbag in an Opel Vivaro Van?
Vauxhall Vivaro (2014-2019 / MK 2) This tutorial shows how to deactivate the passenger airbag in an Opel Vivaro van, a very simple operation that must be done after placing a rear-faci…
How to Set the Time on the Opel Vivaro
How to Set the Time on the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Today, we will discover the procedure to set the time on the Opel Vivaro, following the instructions below. First, get into the vehicle and turn on t…
What is the Fuse Diagram for the Opel Vivaro Van?
What is the Fuse Diagram for the Opel Vivaro Van?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this video, see where the fuse boxes are located in the Opel Vivaro van and their respective diagrams, useful in case you need to check the fuses …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos