|
Do it yourself
| |||
| ||||
Steering Box Tie Rod End Replacement
Model: Vauxhall Astra
Astra G
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
If the wheel exhibits play and noise, especially when driving on uneven surfaces, it is likely that the issue is due to the failure of the spherical joint of the tie rod end of the steering box. Its replacement is straightforward and does not require special tools. Lift the vehicle on a hydraulic lift, remove the front wheel, and locate the tie rod end. Spray some penetrating oil on the tie rod end's fastening nut and the lock nut present on the tie rod. Before loosening the tie rod end nut, it is advisable to loosen the one on the axial joint. Proceed to remove the fastening nut of the tie rod end, extract it from its seat, and unscrew it from the axial joint, noting the number of turns. Then, screw in the new tie rod end the same number of turns to maintain the alignment, secure it to the hub by tightening the corresponding nut, and lock the lock nut.
Updated on 15 February 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2004-2010 /
Astra H)
Damage to the ball joint or the silent blocks of the front suspension wishbone causes noise, especially when driving on uneven surfaces. To replace i…
Vauxhall Astra
(2009-2016 /
Astra J)
Today we will explain how to replace the control arm of the Opel Astra model J on your own. To perform the replacement, we need to lift the vehicle a…
Vauxhall Astra
(2009-2016 /
Astra J)
In this guide, we will see information regarding the disassembly and replacement of the timing belt of the Opel Astra 2.0 CDTi. On this type of engin…
Other guides you may be interested in
|
How to lower the rear seats in the Peugeot 206?
In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |