Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Opel Meriva 1.4

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Spark plugs

This guide provides instructions for removing and replacing the spark plugs in the engine of the Opel Meriva 1.4. First, open the bonnet of your car and start by removing the plastic engine cover; then unscrew the two screws securing the electrical connectors for the spark plugs to remove them, as shown in the video. At this point, use a 10 mm socket wrench with an extension to unscrew and remove the four spark plugs; simply replace them with new ones that have the same thread pitch, following the video tutorial to the end!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Today we will explain how to replace the spark plugs of the Opel Meriva model produced from 2003 to 2010. To perform the spark plug replacement, we n…
Replace the Spark Plugs on an Opel Meriva
Replace the Spark Plugs on an Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Want to replace the spark plugs on your Opel Meriva? Here’s how to remove the car's spark plugs. Lift the front bonnet and secure it, then locate the…
How to Replace the Spark Plugs on the Opel Meriva?
How to Replace the Spark Plugs on the Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the spark plugs on the Opel Meriva, open the bonnet to access the engine bay and loosen the screws securing the plastic cover on top. At t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos