Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the light switch in an Opel Corsa D

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Dashboard light
Operation: How to replace the light switch in an Opel Corsa D

In this video tutorial we can see how it is possible to replace the light switch in an Opel Corsa D by following a few simple steps: the first thing to do is to get into the car, turn off the car and pull the brake by hand; lift the bonnet and secure it with a special rod; disconnect the battery cables to avoid creating errors in the system. Get into the car, driver's side and lower the panel on the left side of the steering wheel (as shown in the video). Once lowered, we must disconnect the electric cable, then with a screwdriver, we must press lightly on the sides of the support to remove it from its seat. Replace the switch if necessary, and then reassemble all parts in reverse order.


Posted on 17 April 2023 by ScegliAuto



How do you reset the Service light on the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) The Opel Corsa Service warning light reset operation is carried out by turning on the instrument panel: once this has been on, it will be necessary t
How to replace the indicator switch on the Opel Corsa.
Vauxhall Corsa (2000-2006 / Corsa C) Below we will see the steps that will allow us to disassemble and replace the turn signal or light switch buttons of the Opel Corsa. First, we get in
Localization and diagram of the fuse boxes for the Opel Corsa E.
Vauxhall Corsa (2014-2019 / Corsa E) In this video, we see where the fuse boxes of the Opel Corsa version E are located: in the passenger compartment, we find the fuse box behind the lig

Other guides that may interest you

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos