Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen. To replace it, you need to remove the plastic grille located under the windscreen.

Start by removing the wiper control arms, take off the seal along the edge, and unscrew the fastening pins of the grille to remove it. Once you access the filter housing, remove the plastic cap in front, unclip the filter retaining clips, and pull it out of its housing.

Ensure there are no dirt residues inside the filter housing and insert the new one, respecting the airflow direction.

Proceed in reverse for reassembly.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Conditioning Filter on an Opel Meriva
How to Replace the Air Conditioning Filter on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Replace the cabin air filter on an Opel Meriva? Let’s look at removing the exhausted filter from the Opel. Open and lift the front bonnet, unscrew th…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) The cabin air filter for this car model is located in the engine bay, on the passenger side, just below the windscreen, near the windscreen washer re…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To access the cabin air filter, open the front bonnet and remove the plastic cover located just below the windscreen: the filter housing is on the pa…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - Where is the pollen filter in the passenger compartment of an Opel Meriva located? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos