Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of an Opel Zafira Tourer 2.0 TDCI

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to change the oil in an Opel Zafira Tourer 2.0 TDCI. First, raise the vehicle slightly to gain easy access underneath. Use axle stands for safety.

Open the oil filler cap on top to allow proper drainage. Get a large bowl to collect the used oil, starting with the oil filter, which you will unscrew and let drain into the bowl.

When replacing the oil filter, remember to also replace the O-ring seal. Drain the oil from the sump, and keep in mind that when changing the oil, it's advisable to replace the sump plug to avoid future surprises.

Now fill the reservoir with oil: this engine requires 4 litres of SAE 5W30 oil (or 10W40, depending on your location).


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Following the instructions in this guide, we will see how to perform the ordinary maintenance of changing the motor oil and oil filter of the Opel Za…
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) In this tutorial, you will learn how to remove the fuel filler flap on an Opel Zafira Tourer. For this operation, you will need a small flat-head scr…
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) The instructions in this guide will show you how to remove and replace the engine oil and oil filter on the Opel Zafira. First, lift the vehicle and …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos