Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Timing belt

See other generations:
Video tutorial

The first step is to unscrew the screws that hold the air filter box cover in place, remove it, and take off the ventilation duct. Next, remove the remaining part of the box and other pieces to clear the area next to the engine where the timing belt is located.

At this point, remove the timing belt cover, take off the old belt that needs replacing, and dismantle and replace both the tensioner and the roller, as well as the water pump. Now you can finally fit the new belt! Then adjust the tensioner and proceed to reassemble all the parts removed so far to complete the job. The video guide is applicable for the 1.9 CDTi turbo diesel engine.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Opel Zafira 1.8
Guide to Replacing the Timing Belt on the Opel Zafira 1.8
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Today's main instructions will show you how to dismantle and replace the timing belt on the Opel Zafira 1.8. First, lift the vehicle and start by rem…
How to Replace the Timing Belt on the Opel Zafira?
How to Replace the Timing Belt on the Opel Zafira?
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) To replace the timing belt on the Opel Zafira, open the bonnet to access the components inside the engine bay. On the left side of the engine block, …
How to Replace Timing Belt on Opel Zafira
How to Replace Timing Belt on Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Replace the timing belt on an Opel Zafira; here’s how to do it. Lift the front bonnet of the car; remove the air box located on the right and the bel…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos